Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

May 24 2011

jimknight

Restoration Methods for Water Damage

Water damage restoration is defined as “the process of restoring a property back to pre-loss condition after sustaining any level of water damage.” In case you didn't know it, there are two large certifying bodies, the IICRC and the RIA, that recommend standards of restoration for water damage.

jimknight

Restoration Methods for Fire Damage

Fire played a critical role in Man's evolution from cave dweller to creator of modern civilization. While it is the best of friends if kept under control, careless handling or unforeseen accidents can make fire the worst of enemies.

jimknight

Restoration Methods for Water Damage

Water is ubiquitous, and that's not only because it covers three-fourths of the earth's area. Even on land, water is everywhere because we need it for so many things. Hence, it is not unexpected that sometimes things can go a bit out of control, resulting in water damage to our houses.


Water can be extremely destructive even if not present in force, and has been known to cause structural and integral damage to a home and its components like wood, metal, cardboard and organic fibers. If these are not attended to, they will rot, deteriorate and eventually be irreparably damaged.


Whether due to a natural disaster like a flood or a manmade one like punctured pipes, water damage is a reality that threatens every householder. Hence, besides being prepared by way of insurance, one needs to know about the restoration methods for water damage.


Water damage restoration is defined as “the process of restoring a property back to pre-loss condition after sustaining any level of water damage.” In case you didn't know it, there are two large certifying bodies, the IICRC and the RIA, that recommend standards of restoration for water damage. Most professional restoration companies follow the IICRC S500 which provides a specific set of practical standards for the different restoration procedures.


According to the S500, there are three categories of water that can cause water damage, broadly differentiated on the basis of the level of contamination present. Also, water damage itself is classified into four categories depending on moisture evaporation rate. Although every situation calls for a different approach, there are certain commonalities between them.


Some of the methods used in the restoration procedure are:


1. Extracting as much water as possible. A well-extracted floor and walls will hasten the drying process. This is done by using wet-dry vacuum units or by gas powered submersible pumps. The extracted water is properly disposed of through a sink or other drainage vent.


2. Use of psychometric tools. Tools like hygrometers are used to measure the moisture content of the different building materials (flooring, drywall and wallboard) and to measure the daily progress the drying process is making.


3. The use of air movers. Air moving across a materials surface will cause that material to dry. This is part of the secondary drying process that is done after the initial water extraction. Besides fans, dehumidifiers that remove humidity from affected units are also used.


4. Mold removal. Mold, if not eradicated immediately, can spread and become difficult to remove. This, in turn, can cause a whole host of health hazards, from mild allergic reactions to lung disease and even death.


5. Document restoration. In spite of the spread of electronic media, many people keep several documents in their original paper form; consequently, they are susceptible to water damage. Nowadays, it is possible to restore damaged documents with specialized equipment.


There are specialized and accredited water damage restoration companies in every state. While some rudimentary restoration can be done by the householder, extensive damage calls for the services of professional.

Steamatic of Columbus proudly provides Air Duct Cleaning, Carpet Cleaning, Restoration Services & more to the Columbus, GA area including Phenix City & Fort Benning.

For more information on Air Duct Cleaning Columbus visit our website.

May 10 2011

jimknight

What are the top 3 mistakes people make getting Air Conditioning services at home

“It was when I found out I could make mistakes that I knew I was on to something.”

- Ornette Coleman, American jazz legend.


While it's always good to learn from mistakes, it's definitely better to learn without committing them. Here, in this article, we present the top 3 mistakes people make getting air conditioning services at home, in the hope that in times to come readers will be able to avoid them.

Choosing the cheapest service

This is a common mistake committed by many householders when selecting air conditioning services. Also, you should be aware of ludicrous discounts or phony offers. You must have heard of the saying, “If you offer peanuts, you will get monkeys”; this is applicable for air conditioning services as well. While a few dollars saved may give you momentary satisfaction, you may end up losing much more due to shoddy service.


Mind you, we are not saying that an inexpensive service is necessarily cheap. We just want to emphasize that price must never be the sole criterion to choose your air conditioning service. Remember the adage, “If it sounds too good to be true, it probably is.” Do your research and come up with multiple offers. With the Internet, research is easy and fast. Also, choose a service that is recognized by or accredited to an industry body. Reaching out to friends, relatives and neighbors is also a good idea to get the lowdown on different services in the locality.


Leaving it until it's too late

Many householders wait until they actually have a problem before they call an air conditioning service. While this necessarily increases the cost, it also forces decision-making under pressure, often resulting in the wrong decisions such as going with the lowest bid. As the saying goes, “Prevention is better than cure”; hence, it's better, cheaper and more convenient to prevent a problem with the air conditioning than rectifying it after it arises.


One way to achieve this is to sign an annual maintenance contract (AMC) with a reputed service. Not only does this work out cheaper in the long run, it also ensures that your family is not left sweltering in the heat for the professionals to arrive when the air conditioning goes dead.


Not getting a written guarantee


Make sure that the company is willing to stand behind its products and services with a guarantee. Such a guarantee, incorporated in the contract, should preferably be of the no-hassle, no-questions asked variety. Be sure the guarantee is not merely verbal but put in writing and includes a Performance Guarantee, Investment Guarantee and a real 100% Satisfaction Guarantee.


Air conditioning, unlike a few decades ago, is no longer a luxury but a necessity. This makes it all the more important that you recognize the top mistakes people make when contracting air conditioning services and ensure you avoid them. This will ensure the comfort of your family, lesser pressure on your finances and your peace of mind.

North Town Home Services sells and installs the latest in home comfort systems as well as maintains existing systems. Reduce your energy bill, and enhance your health and home.For more information on Chicago Air Conditioning visit our website.

jimknight

Some Tips For How to Repair your AC System

Check the fan blower belt for excessive slack or damage. This is another possible reason for low cooling performance by obstructing air flow.Be sure to regularly wash the condenser coil by spraying water on it. This is especially important if the external unit is in a dusty area or one where leaves fly around. These can clog up the coil and cause the unit to operate ineffectively.

jimknight

Common mistakes when getting Air Conditioning System at Home

we present the top 3 mistakes people make getting air conditioning services at home, in the hope that in times to come readers will be able to avoid them.Choosing the cheapest service,Leaving it until it's too late,Not getting a written guarantee .

May 06 2011

jimknight

How Churches Can Benefit From Owning a button Press and Using it for Fun Raisers

Churches are one of the biggest and the best fund raising organization in the present world, because most people have a hard time saying no to giving to God, and that’s great for the up keeping and meeting the general expenses of a church. Fundraising brings people and talents together in all sorts of new and interesting ways. Fundraising events also tend to offer an opportunity for the participants to socialize and get to know new people. Church fundraising is not a simple task and one needs to think of the best approach in order to organize a successful fundraising event. When the time comes to start thinking of church fund raising ideas, clearly the thing one would be most of the organizations are concerned with is making a decent profit. There are various ideas for fundraising by churches.


One very good fundraising mechanism for churches can be to own a button press. Buttons can be promoted during a fundraising event, and can be sold along with the other items ranging from a bike to other large donated articles. The buttons can be promoted using ideas like, buttons of hope. Buttons of hope are buttons that have a photo of some one special on it. Wearing a button with an imprint of a picture of a loved one tends to give a sense of honor and pride to the person wearing it and also proves to strengthen the bonding between two individuals. This way the people would collect and buy a lot of buttons from the church and since it is something that is being manufactured by the church itself, the amount of profit made will also tend be more.

Buttons can also be used as a medium to advertise about the church. They can be used to promote about the church simply by printing its name and contact information, like a phone number or website, on it or they can also be used to promote something special like an upcoming events like church events, missions, or other fundraising activities and thus can prove to be a very handy yet simple advertising tool. Organizations who own a button tool have tremendous flexibility and avenues for creativity and thus churches can attract more charity donors by making use of the press.

Buttons can also be dealt to appeal to certain demographic by stressing a kid's activities or special events for seniors. One of the greatest and most rewarding uses of a button machine is the creation of novelty items that can be an excellent addition to the list of original fundraising ideas.

Buttons can also advertise new services, for instance a contemporary jeans and sneakers service featuring contemporary Christian rock instead of traditional hymns. In this case, perhaps clergy and those working with the youth as well as church members can sport their great promotional buttons. These are some of the many benefits that a church has if it ever decides to own a button press.

Make your very own button necklace! ABM has all of the products and supplies for you to make your very own chunky necklace as well!

jimknight

Create A Professional Button Badge

The design can be made, by hand or by using graphic editing software like Adobe Photoshop etc. In order to design a badge, first of all a template of the design should be created for which three different size circles needs to be drawn within each other. The size of each of those three circles depends on the size of the button that is to be made.

jimknight

Mechanism for churches can be to own a button press

One very good fundraising mechanism for churches can be to own a button press. Buttons can be promoted during a fundraising event, and can be sold along with the other items ranging from a bike to other large donated articles. The buttons can be promoted using ideas like, buttons of hope. Buttons of hope are buttons that have a photo of some one special on it.

April 30 2011

jimknight

The Differences between tile and laminate flooring - pros and cons of both

Laminate flooring was invented in the 70s by a Swedish company called Perstop. It was under the brand name Pergo. It was marketed in the 80s ad it came to the US in the mid-90s. Pergo later became the flooring division of Perstop. Laminate flooring is a multilayered flooring product. It is considered a hybrid since synthetic product is fused together with a lamination process.

This type of tiling replicates hardwood or stone, but it is clearly not made out of it. The inner layer of the tile is made of fiber board and melamine resin. A lot of people like laminate flooring, but along with its multiple plus points there are a few negatives as well. Here are a few pros and cons of laminate flooring:

Pros-
  • Majority of people like laminate flooring because it is very easy to install. Several hundred square feet of ground space can be installed within a couple of days.
  • Compared to other floor tiling, laminate flooring is very easy to clean.
  • Laminate flooring is impervious to scratches and dent compared to other forms of flooring. There are companies which offer warranties of more than a decade for this kind of flooring. It is known as a “wear layer” in the industry which enables it to protect the photographic layer which is situated underneath.
  • It is a very tough form of flooring, which is also stain resistant. Even if there are stains, it is easy to just clean it up with a mop.
  • Laminate flooring comes with a click lock design which comes with dry glue. So it can be applied on to the floor, just with a swipe of a moist cloth or water.
  • Laminate flooring is good for moist places.
Cons-

  • Laminate flooring looks like wood or stone but it is not. It is made out of artificial material which can bother a few.
  • This type of flooring is slippery in nature.
  • Laminate flooring cannot be repaired and refinished as a replacement is required if there are deep scratches.
  • Tile is manufactured out of materials such as stone, metal, glass and even ceramic. These are all hard wearing material. It can used for any type of covering job e.g. floor, roof, walls etc. Nowadays tiles are also made out of materials such as wood, perlite, mineral wool etc.
  • Tile flooring is considered one of the most popular forms of flooring today. There are a lot of reasons why tile flooring is so popular, but there are a few drawbacks as well. The following are the pros and cons of tile flooring:


Pros-
  • Tile floors are very durable.
  • Tile floors are very easy to clean.
  • Attractive flooring options are available with tile flooring.
  • This type of flooring is easy repairable.
  • Tile flooring is available everywhere.
  • It is stain resistant in nature.
  • It is not damaged by water, so it is an excellent flooring option for bathroom.
  • An excellent option for kitchen flooring as well.


Cons-
  • Cold weather can cause colder underfoot.
  • Tile flooring is a bit slippery in nature.
  • It is very uncomfortable in case someone is standing for a long period of time.
  • Tile flooring does not have any sound dampening qualities.


All carpet is made by stitching yarn through a backing material, creating many looped tufts, then applying an adhesive backing to bind the tufts in place.
For more information on Phenix City Carpet visit our website.
jimknight

Few pros and cons of laminate flooring

Compared to other floor tiling, laminate flooring is very easy to clean.Laminate flooring is good for moist places.Laminate flooring looks like wood or stone but it is not. It is made out of artificial material which can bother a few.This type of flooring is slippery in nature.

jimknight

Most popular types of carpet

Nowadays, carpet is found in almost every household. It might be all around the house or across certain rooms in the house like the living room, bedroom etc. Many home owners prefer the carpet in comparison to other more expensive flooring options like marble tiles, stone and wood. The type, color and texture of the carpet are very important as it affects the overall appearance of the room.

April 29 2011

jimknight

Insulating Your Pipes and Attic, A Must for Winter

Insulating your home or apartment is a must in today’s world. Insulating your home ensures less breakage to your home structure, appliances, utensils and other valuable belongings. The most significant thing to do while insulating the household premises is to protect the attic and piping system.

When the winter is approaching, insulating the attic is a must as the HVAC system can cause the heated air to build up in your attic, which can cause damages like wood warping. Damage can be furthermore if the heated air gets mixed with condensation and moisture.

Insulation of attic is also very important for energy conservation and maintenance of warmth around the home during the winter season. Insulation is done by using a material which has millions of tiny air pockets. These pockets basically do the work of conserving or trapping the heat.

Fiberglass batts are considered the most common material used for insulation. There is an additional lair in the insulation material which helps in absorbing the moisture. This additional lair is made of a substance called R-value. The amount of R-value in the insulating material reduces when it absorbs moisture. Insulation comprising of higher R-value is considered most effective. These fiberglass insulation batts are very wide in length and can range up to 8 feet.

One thing one should do while insulating attics is not to insulate attic ceilings. During the winter attics face damages caused by frost. The moisture developing due to the frost can develop a dry rot on the attic roof, resulting in development of fungus, molds and mildew growth.

This phenomenon can also deplete the life span of the roof covering due to the entrapment of heat against the bottom of the roof. The only thing to do here is to insulate the areas under the roof. In order to avoid accumulation of moisture at the bottom of the roof a vapor barrier needs to be installed. If this is not done it can cause serious respiratory problems for the members in the household.

As we all know during the winter season the water turns into solid ice. This conversion can cause expansion which might cause the piping system to freeze. Waters can even soak into the walls of the house and cause problems. In order to avoid these problems and also the perils of bursts and leakages, insulation is required.

The first thing to do before insulating the piping system is to buy insulation material and proper plumbing supply. There are various kinds of insulation material available in the market but you should choose according to your requirement and budget.

Proper cleaning needs to follow after you’ve bought the supplies. Not cleaning the piping system will lead to accumulation of dirt, which might produce bacteria in the long run. Even improper cleaning might lead to flow of dirty water which may cause health hazards.

While insulating make sure all the portions of the pipe is properly covered as any space left might cause leakage in the near future. Corners and T-joints need to be given more attention compared to the other regions of the pipe while insulating. 

plano kleenairservices is a full service company, servicing all makes and models of air conditioning & heating systems.If you are experiencing any problems with your hvac, air conditioning or heating systems, don't hesitate give us a call immediately at (972) 527-3207.

For more information on Air Conditioning Plano visit our website.

jimknight

Home Heating Improvements

Solar heating system is considered the most environmentally friendly source of household heating. It is at the same time very economical compared to other energy alternatives. The solar heating system is also renewable which makes it more energy efficient compared to other options.

jimknight

Insulating Your Pipes and Attic

When the winter is approaching, insulating the attic is a must as the HVAC system can cause the heated air to build up in your attic, which can cause damages like wood warping. Damage can be furthermore if the heated air gets mixed with condensation and moisture.

April 28 2011

jimknight

Tips to Prevent or Reduce the Amount of Flood Damage to Your Home

Floods, by nature, are more prevalent during the rainy season. They can strike flood prone regions or even places which have never faced problems of flood before. Hazards caused by flood can be local, affecting a small neighborhood or it can be disastrous at a national level, affecting multiple states at once. If you live in an area which has a history of floods in the past you should take precautions in order to save yourself, your family members and your home. Even if you reside in an area which has not faced floods before, you should still take some safety measures against it.

The following are the things one should do before a flood takes place.

  • Flood waters can block the drains of your home. So make sure you have a sewer tap installed along with appropriate check valves.

  • People residing in flood prone regions should raise the height of the location of water heater and electric panels in order to mitigate further disasters.

  • In order to avoid leakages you can use water proofing compounds to seal the walls of your basement.

  • Try to move your vehicle in a higher ground if you want to avoid car damages.

  • If you reside in a flood prone region, try to sandbag your home premises to mitigate over flooding as much as possible.

  • You can also prevent flood waters from entering your premises by building barriers like beams and floodwalls.

  • Try to move high value items out of the lawns, backyards and unmanned premises.

  • Get national flood insurance in order to indemnify your losses caused by floods. Keep the insurance papers in a very safe place like a locker so that it can be found after the flood has stopped.

If you have taken the above precautions before the flood even takes place you can avoid a lot of damages which could have cost you a lot. But during the flood is taking place and after it has occurred, you should also take some safety measures which are as follows.

  • Try to avoid from being in a car when a flood is happening. If you are in one try to leave it and move to a higher ground.

  • Avoid walking on standing water as variability in height of the base ground can cause falls which can lead to injuries.

  • Only return to your respective homes when it is declared that it is safe to return in the flooded areas.

  • If you get stranded during the flood, try calling emergency services.

  • Make sure there is no debris in your household premises. If contamination takes place try to contact emergency services to get rid of the problem.

  • Do not start using electrical or electronic devices immediately after the flood stops. Gets an electrician to check all the lines including the mains before you start using them.

  • Contact your insurance company or broker as soon as possible in order to claim for the losses caused by the flood.

  • Take all possible measures in order to prevent future losses from happening.

Steamatic by Carrara Companies offers professional commercial and residential cleaning services to northeast Ohio including the Cleveland, Akron, Canton, and Columbus areas. Some of our most popular services include carpet and air duct cleaning.

For more information on Columbus Carpet Cleaning visit our website.

jimknight

Things one should do before a flood takes place

In order to avoid leakages you can use water proofing compounds to seal the walls of your basement.Do not start using electrical or electronic devices immediately after the flood stops. Gets an electrician to check all the lines including the mains before you start using them.

jimknight

Fire Damage Prevention Tips

Fire damages have an immense impact both financially and emotionally, and can be very difficult to recover from. Restoration professionals can assist you to recover some items like furniture, but the best thing to do here is to make sure that there are no chances of fire at home. Prevention, as you know, is always better than cure.

April 27 2011

jimknight

Everyone Should Know Need Of Air Duct Cleaning

An air duct is a cylindrical or a square shaped tube which is used to carry cool and hot air into different rooms around the house. It is a part of the home ventilation and air conditioning system. Pressure is the driving force here, which steers the air around the air duct system. Air ducts are generally made out of sheet metal. The vents are strategically placed around different rooms in the house in order to provide air according to the requirements of the room.

If your air duct system is not properly installed, operated and maintained there might be problems occurring in the future. Components of your cooling and heating system may get tarnished with dust and debris. These components are the leading reason behind the air flow across the rooms, so the dust contamination can make the air in the duct polluted, resulting in pollution across different rooms around the house. Due to of air duct systems to the household air dust, debris and hair can also end up in the duct system. This can happen due to the return ducts which feeds air into the furnace.

If you are the problems you will need proper air duct cleaning. Air duct cleaning will help you to remove dust, debris, pet dander and hair from the system. Proper cleaning might also in removal of odd objects coins, stationary items and toys which might have been accidentally dropped in the air duct system. Good cleaning ensures improvement in the indoor air quality.

There are examples of water getting in to the air duct system through condensation or leakage. If like this happens, you need to get your air ducts cleaned as this can cause growth of molds in the system. Depending on the severity of the mold you need to some . First of all you to find the behind the leakage or condensation and get it fixed. Secondly you need to disinfect the air duct system depending on the mold spread. If it is very severe then the best solution is to get of the present air duct system and a one.

Another way to keep the air ducts clean without much fuss is to the filter on the furnace. This prevents dirt and debris from accumulating in the heating ventilation and air conditioning system also known as HVAC system. Filtering replacement ensures less accumulation of dust, it cannot prevent it from settling in. This was suggested by the Canadian Housing and Mortgage Corporation.

Return ducts accumulate a lot of dust compared to the supply ducts. So the return ducts need to be cleaned on a regular basis. You can a professional vacuum cleaning company in order to clean the return duct or vacuum it yourself after removing the outside grill.

If a construction work is in your then accumulation of particles debris, fiberglass and sawdust can in your air duct system. This accumulation causes blockage which can affect the air flow to your furnace. So in this case you might also consider air duct cleaning to ensure proper flow of air in the house.

Brouwer Brothers Steamatic of Chicago is a Total Cleaning and 24/7 Emergency Restoration Service Company.For more information on Carpet Cleaning in Chicago visit our webiste.

jimknight

How Do I Know When I Need Air Duct Cleaning

If your air duct system is not properly installed, operated and maintained there might be problems occurring in the future. Components of your cooling and heating system may get tarnished with dust and debris.

Older posts are this way If this message doesn't go away, click anywhere on the page to continue loading posts.
Could not load more posts
Maybe Soup is currently being updated? I'll try again automatically in a few seconds...
Just a second, loading more posts...
You've reached the end.

Don't be the product, buy the product!

Schweinderl